US - Ohio - Columbus - AX

Expand all | Collapse all

Manufacturing Experience/References Needed !!!

  • 1.  Manufacturing Experience/References Needed !!!

    GOLD CONTRIBUTOR
    Posted 26 days ago
    We are looking for a couple of manufacturing based users of D365 who would be willing to share their experience with us!

    First, a little bit about HBD.  We have 3 main manufacturing groups; rubber products, power transmission and precision components, with roughly a dozen plants all within the continental US.  Each of these plants were once independent and each runs a unique ERP software.  We are implementing D365 at each one individually and sticking to a "vanilla out-of-the-box solution" as much as possible.  Not that we are necessarily opposed to ISV options, but we are avoiding custom code.

    Our implementation team is small but mighty and each plant brings new challenges such as labor tracking & trace-ability nuances, incorporation of drawings & work instructions, along with continued training & improvement at locations already live on D365, etc, etc, etc.  While we are busy wading through these puzzles, our leadership team has questions about how other manufacturing companies are handling some of these same issues.

    Regardless of your stage of implementation, please let me know if you'd be willing to set up a call or an in person meeting to bounce around some ideas and compare what's working vs what challenges we're both facing.

    #FinanceandOperations
    #Leadership #Functional​​​​
    #DeploymentandImplementation
    #Manufacturing​​

    ------------------------------
    Jody Cronk
    HBD Industries
    ERP Supply Chain Specialist
    US-AXUG OH (Columbus) Chapter Co-Lead
    ------------------------------


  • 2.  RE: Manufacturing Experience/References Needed !!!

    Posted 6 days ago
    Sorry for the delayed reply.  Nord-Lock Group is in a similar situation.  The global group is comprised of three main product divisions, with five manufacturing sites, and over ten sales offices (and growing).  When purchased, each product division is/was running a unique ERP system.  We are now in the process of unifying all divisions, sites, and sales offices into D365FO and D365Sales/CRM.  It is a long, rough road.

    So far we have fully implemented D365FO at our Pittsburgh site, part of the Tensioning division and North American Sales office.  This was completed in January 2018, after a three month roll-out plan.  We are currently in the middle of two additional manufacturing/sales sites, in Walsall, UK and St. Gallenkappel, CH.  Walsall is scheduled for go-live in April 2020, and St. Gallenkappel in November 2020.  We are also starting our Sales-only office rollouts with our office near Madrid, scheduled for completion Q2 2020.

    As you have observed so far, each site and product division brings their own hurdles.  However, we have found that we are more similar than originally thought.  Due to the speed we are planning our rollouts, and our small core implementation team, we are also trying to stick to 'vanilla' Dynamics.

    Feel free to contact me directly with questions, tips, or a shoulder to cry on!

    ------------------------------
    Heather Hayward
    heather.hayward@nord-lock.com
    Nord-Lock Group
    PA
    ------------------------------



  • 3.  RE: Manufacturing Experience/References Needed !!!

    GOLD CONTRIBUTOR
    Posted 5 days ago

    Hi Heather ~

    Thanks for responding! 

    I'm copying Mary Sparks, our program manager, and Liddy Heath, our VP of IT so they have your contact information as well.

    It sounds like you are in a similar dynamic.  Are you using any ISV solutions?  What about storage of drawings and work instructions associated with items and BOMs?

    I'm sure we'll be reaching out with a ton more questions.

    Thanks ~

     

    photograph

    Jody Cronk 
    ERP Supply Chain Specialist

    email: jcronk@hbdeo.com | office: (614) 408-9577 | mobile (000) 000-0000

    HBD Industries, Inc. | 5200 Upper Metro Place, Suite 110 Dublin, OH 43017 | www.hbdindustries.com

     

    The information contained in this communication and any attachments is confidential and may be privileged, and is for the sole use of the intended recipient(s). Any unauthorized review, use, disclosure, reproduction or distribution is prohibited. If you are not the intended recipient, please notify the sender immediately by replying to this message and destroy all copies of this message and any attachments. The sender is neither liable for the proper and complete transmission of the information contained in this communication, nor for any delay in its receipt.

     

     

     

     






  • 4.  RE: Manufacturing Experience/References Needed !!!

    Posted 5 days ago
    We are using two main ISV programs right now.

    Formpipe's Lasernet for our external documents.  We find it easier to work with than SSRS.

    Bluestar's CAD/ERP Link module for passing data and drawings between our Autodesk Inventor and Vault.

    We have set up storage locations in Sharepoint for the storage of our attachments, such as work instructions, customer drawings, purchase orders, etc.

    We have had to use outside consultants for some financial setup and minor customizations in some of the other countries, especially in Asia.

    Best regards,
    Heather Hayward
    Nord-Lock / Superbolt
    www.nord-lock.com
    Nord-Lock Group
    Sent from my mobile device. The information in this email may be confidential, unauthorized use strictly prohibited. For information on how we process personal data please see www.nord-lock.com/privacy





  • 5.  RE: Manufacturing Experience/References Needed !!!

    Posted 3 days ago
    Just saw this today.  Ludowici will be implementing manufacturing in 2020.  We have a lot of it built in our sandbox but a ways to go.

    Feel free to contact me any time

    ------------------------------
    Jeff Lucas
    Ludowici Roof Tile
    New Lexington OH
    jeff.lucas@ludowici.com
    ------------------------------



If you've found this thread useful, dive deeper into User Group community content by role